The purpose of the system is to keep the pressure set in the heating and cooling plants constant. Tanpera pump-controlled pressurization system consists of 3 main components;
• Remote Control and Control Unit
• Hydraulic Unit
• Expansion Tank
It is used in heating and cooling systems to balance the variable water volume due to temperature change in all building and industrial applications.
CONTROLLED OPERATION
It provides a controlled operation at a constant pressure by measuring the pressure and loss leakage values on the installation with high precision.
AREA SAVING
Tanpera Pump-Controlled Pressurisation System covers a smaller area as it has an average expansion capacity of five times higher than conventional type membrane expansion tanks.
OPERATING FOR A LONG TIME
With the programmable deaeration mode, it provides efficient discharge of dissolved air in the plant.
DEFECT INFORMATION
The large LCD display and error notification system make it easy to identify the cause of the defect and tackle it. In addition, the amount of water taken from the network is measured with the high-precision flowmeter inside the device and fault information is provided in case of a leakage loss in excess water consumption.
PROTECTION AGAINST POWER CUT-OFF
With the backup power unit in the system, the plant is kept safe in case of a power failure.
COMMUNICATION WITH BUILDING AUTOMATION SYSTEM
It transmits traceable information and fault information to the building automation system with an advanced electronic communication protocol. Different communication protocols conformity can be achieved.
